-
-
TPU polyurethane sealant
- Product1
nine hundred
Product features:
◆ Single component, solvent-free, room temperature moisture curing, polyurethane material
The facade coating is non flowing, oil resistant, water resistant, salt spray resistant, aging resistant, and vibration fatigue resistant.
◆ Fast curing speed, easy construction, and good paintability. High bonding strength with various materials such as glass, metal, and paint.
HY464 polyurethane windshield adhesive
High strength, high elasticity, with primer, used for direct assembly of car windshields.
HY465 polyurethane glass structural adhesive
High strength and elasticity, suitable for the assembly and maintenance of car windshields.
HY466 polyurethane sealant for joint filling
High adhesion and strong filling ability. Widely used for welding seams and joint sealing in vehicles, mechanical equipment, cold storage, containers, etc
Product performance and packaging specifications:
Product code
HY464
HY465
HY466
Appearance color
Black paste like substance
Black paste like substance
Black paste like substance
density
1.1~1.3
1.1~1.3
1.1~1.3
Dry time (min)
15~60
15~60
15~60
Curing rate (mm/24h)
3~6
3~6
-
Tensile strength (MPa)
6~8
4~6
2~4
Elongation rate (%)
four hundred
four hundred
three hundred
Shear strength (Mpa)
five
three
two
Tear strength (KN/m)
twenty
thirteen
ten
Shore A strength
45~60
45~60
45~60
operation temperature
-45~90
-45~90
-45~90
Packaging specifications
310ML cylinder, 50 cylinders/box; 600ml/strip, 20 strips/box
Bonding process
1. Remove dust, oil stains, and moisture from the adhesive surface.
2. Brush primer or activator on the adhesive surface (this step is not required for filling sealant).
3. Cut open the mouth of the rubber cylinder, install the rubber nozzle, and cut it into a suitable slope before installing it into the rubber gun.
4. Apply the glue evenly on the surface of the glue application, close and assemble, and scrape off any excess glue.
nine hundred and one
matters needing attention:
1. Suggested construction conditions: temperature of 5-40 ℃, relative humidity of 65-75%
2. Store in a cool, dry and sealed place for a storage period of 6 months.
Product features:
◆ Single component, solvent-free, room temperature moisture curing, polyurethane material
The facade coating is non flowing, oil resistant, water resistant, salt spray resistant, aging resistant, and vibration fatigue resistant.
◆ Fast curing speed, easy construction, and good paintability. High bonding strength with various materials such as glass, metal, and paint.
HY464 polyurethane windshield adhesive
High strength, high elasticity, with primer, used for direct assembly of car windshields.
HY465 polyurethane glass structural adhesive
High strength and elasticity, suitable for the assembly and maintenance of car windshields.
HY466 polyurethane sealant for joint filling
High adhesion and strong filling ability. Widely used for welding seams and joint sealing in vehicles, mechanical equipment, cold storage, containers, etc
Product performance and packaging specifications:
Product code
HY464
HY465
HY466
Appearance color
Black paste like substance
Black paste like substance
Black paste like substance
density
1.1~1.3
1.1~1.3
1.1~1.3
Dry time (min)
15~60
15~60
15~60
Curing rate (mm/24h)
3~6
3~6
-
Tensile strength (MPa)
6~8
4~6
2~4
Elongation rate (%)
four hundred
four hundred
three hundred
Shear strength (Mpa)
five
three
two
Tear strength (KN/m)
twenty
thirteen
ten
Shore A strength
45~60
45~60
45~60
operation temperature
-45~90
-45~90
-45~90
Packaging specifications
310ML cylinder, 50 cylinders/box; 600ml/strip, 20 strips/box
Bonding process
1. Remove dust, oil stains, and moisture from the adhesive surface.
2. Brush primer or activator on the adhesive surface (this step is not required for filling sealant).
3. Cut open the mouth of the rubber cylinder, install the rubber nozzle, and cut it into a suitable slope before installing it into the rubber gun.
4. Apply the glue evenly on the surface of the glue application, close and assemble, and scrape off any excess glue.
nine hundred and one
matters needing attention:
1. Suggested construction conditions: temperature of 5-40 ℃, relative humidity of 65-75%
2. Store in a cool, dry and sealed place for a storage period of 6 months.
