HY467/HY468 two-component modified polyurethane structural adhesive has the advantages of solvent-free, isocyanate free, almost zero VOC, anti pollution, green environmental protection, and excellent anti-aging ability after curing. Deep curing fast, suitable for fast bonding and sealing in fields such as automobiles, rail transit, electronics, and electrical appliances.
nine hundred

Product characteristics of HY467/468 polyurethane structural adhesive
1. Solvent free, PVC free, isocyanate free, non-toxic, odorless, pollution-free, neutral and environmentally friendly
2. Room temperature rapid curing (self drying adhesive), suitable for a wide temperature range
3. It has excellent adhesive properties for most materials such as metals, ceramics, glass, engineering plastics, etc., and its performance is even better when combined with the primer
4. Excellent weather resistance, aging resistance, and superior tensile and compressive recovery

HY467/468 Polyurethane Structural Adhesive Packaging Specification
(1) Plastic pipe: 400ml per tube (double tube).
nine hundred and one
Application scope of HY467/468 polyurethane structural adhesive

High modulus, high strength, used for rapid bonding and deep curing of components in industries such as automobiles, rail transit, electronics, and electrical appliances
Storage method of HY467/468 polyurethane structural adhesive
Products with intact packaging can be stored for 6 months in a cool, ventilated, and dry place at 5-27 ℃.
nine hundred and two
  Usage method of HY467/468 polyurethane structural adhesive
1. For high-strength structural bonding, first clean the surface of the material to be bonded to remove surface contaminants such as paint, oxide film, oil, dust, release agent, and all other surface contaminants
2. Rotate 90 degrees; Unscrew the bottle cap and install the mixing nozzle (1:1 mixing nozzle)
3. To achieve greater adhesive strength, it is recommended to apply double-sided tape with a bonding gap between materials between 0.08-0.13mm
4. During the curing process, use appropriate fixtures and ensure that there is no relative displacement between the bonded parts
5. Remove excess adhesive before curing
6. Be careful to mix the two components evenly when using. The standard for uniform mixing is uniform and consistent color. If using a mixing nozzle, please discard the small portion of adhesive that has not been mixed evenly at the front end